Hydraulic cylinder damage
Hydraulic cylinders could not work properly without seal kits /Komatsu arm seal kit/. During work, they are subjected to high pressures, temperatures and forces. In such difficult conditions they must stop leaks of the hydraulic fluid both inside and outside. Therefore, we must ensure the highest quality of seals and constantly monitor their condition.
The hydraulic cylinder is much less complicated in construction than the hydraulic distributor. However, whether we are able to repair the first one ourselves depends on the type and degree of failure. A frequent cause of damage to a hydraulic cylinder is the work out of its seals. There are three types of seal kits in the excavator or mini excavator arm. These are: boom cylinder seal, bucket cylinder seal and /Komatsu/ arm cylinder seal kit. Incorrect choice of seals or their questionable quality significantly shortens their operational capabilities. Leaks will cause sediments and impurities on the actuator’s mechanical system, as well as a decrease in the efficiency and power of the entire system.
If you are sure that only the seal needs repair, you can try to replace it yourself. Although replacing the seal does not seem too complicated, it requires some precision, knowledge and of course workshop facilities. Therefore, if you do not feel confident, you should seek help from a specialist. Inaccurate installation can cause further unwanted damage.
Replacement of hydraulic cylinder seal
The first step is to disassemble the actuator and check its technical condition. Wait for the piston rod to be pulled out until the residual oil has drained out. If the actuator is not significantly damaged, it should not fall out (except for the guides). Estimate the condition of the piston rod, piston and cylindrical pipe. If nothing raises objections, you can start replacing the seals. To do this, disconnect the piston from the piston rod, then slide the stuffing box out of it. Replace the packing on the gland first, then the piston seals. After all, you can do the re-assembly. The gland must be on the piston rod – same as when dismantling. Then slide the piston in and take care that the guides and seals do not slide off it.
Thanks to the purchases in our online store, you will save the necessary resources to run your business. Also you can quickly and efficiently repair the damaged component and reactivate machine to work. In addition, you get guarantee of quality, professional and pleasant service without trouble connected with contacting service or dealer.
Benefits of buying:
- money saving
- time saving
- product of best quality in minimum price
- guarantee of quality
- professional and calm service
- Express type of delivery